2021 Miller IntelliSpray Base

2021 Miller IntelliSpray

What is IntelliSpray?

IntelliSpray is a Pulse Nozzle System that maintains droplet size as the speed of the sprayer changes

• This results in better coverage

• Less drift as the speed of the sprayer increases

• 36 Virtual Sections

• Turn Compensation

• TeeJet Stacked Nozzle bodies (3 plus 1). The nozzle body has a 3-way turret and a single straight through nozzle normally used for high volume applications. The Pulse Width Modulation Valve can be installed on either the 3-way turret or the single – operators choice. You have the ability to spray with the IntelliSpray system or convectional spraying system – operators’ choice

• Rate increase of up to 30% above target rate on 8 nozzles

• Electrical disconnects at lift arms so you can still easily remove the boom

• Instant on and off at nozzle bodies

• Can spray conventionally

• IntelliSpray maintains a constant droplet size by maintaining a constant spray pressure

• All chemicals have a recommended droplet size to do a accurate job of coverage

• Droplet size requirements are listed on the chemical label

• Droplet size is one of the criteria you use to choose your spray tips

• This is what normally happens on a conventional system

• You choose a spray tip to match your needs – Lets say:

• I want to spray at 14 mph

• I would like to run at 35 psi

• I would like to apply 15 gpa

• I need a tip that will maintain a medium droplet size

• As you speed up the pressure increases to maintain an accurate flow rate - Droplet size decrease or goes to a fine droplet size – Thus excessive drift occurs and you are off of the recommended droplet size

• If you slow down the pressure decreases to maintain an accurate flow rate - Droplet size increase or goes to a course droplet size

• You have less drift but again you are off of the recommended droplet size

• Whatever speed you are going 8 mph or 15 mph the pressure will remain constant at whatever pressure you chose

• If the pressure stays constant the droplet size stays constant

• Thus doing a much better job of spraying

• Less susceptible to drift

• Maintaining droplet size requirements from the chemical producer